MPP Power Cable Protection Pipe - High-Temperature Resistance | China Suppliers & Factory
Product features
MPP power pipe has excellent electrical insulation.
MPP power pipe has high thermal deformation temperature and low temperature impact performance.
The tensile and compressive properties of MPP power pipe are higher than HDPE.
MPP power pipe is light, smooth, small friction force and can be welded by heat fusion.
Good environmental performance, no pollution of materials, long service life.
Excellent performance
Overall merit
As a critical material in power engineering construction, MPP power pipes are essential for ensuring the safe operation of cable lines. Polypropylene is known for its high strength, toughness, and excellent heat resistance, corrosion resistance, and electrical insulation properties. Modified polypropylene further enhances these fundamental properties.
MPP power pipe has become an indispensable important material in power engineering construction with its excellent material characteristics and wide application fields.
Parameter
Summary of MPP power cable protection pipe specifications and models
Its specifications and models are mainly distinguished according to the outer diameter, wall thickness and length. The following is a detailed classification of common specifications:
1. Combination of outer diameter and wall thickness
| Outer Diameter (DN) | Wall Thickness Options |
|---|---|
| DN90mm | 5mm, 6mm |
| DN110mm | 6mm, 7mm, 8mm, 9mm, 10mm |
| DN160mm | 7mm, 8mm, 9mm, 10mm, 11mm, 12mm |
| DN180mm | 10mm, 12mm, 15mm |
| DN200mm | 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm |
| DN225mm | 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 18mm |
| DN250mm | 13mm, 14mm, 15mm, 16mm, 17mm, 20mm |
2. Length specification
Common single pipe length is 6 meters, 9 meters, 12 meters.
3. Classification and application scenarios
Suitable for conventional cable laying projects.
Used for cable protection in special sections such as roads, railways and riverbeds without large-scale damage to the ground (pipe jacking/pull pipe).
- Small diameter (such as DN90mm, DN110mm) is mainly used for general cable laying, wall thickness is relatively thin;
- Large diameter (such as DN200mm and above) is suitable for ultra-high voltage cables or complex environments (such as crossing roads), and a larger wall thickness should be selected to enhance the pressure bearing capacity.
4. Connection mode
The connection mode of MPP cable protection pipe is also part of its specifications. Common connection modes include socket connection, hot fusion connection, electric fusion connection, etc. Different connection modes are suitable for different application scenarios and engineering requirements, and the appropriate connection mode can ensure the safety and reliability of cable pipeline.
When selecting MPP cable protection pipes, it is essential to consider the specific project requirements, construction conditions, and the specifications and characteristics of the cables, ensuring that all specifications are compatible. Additionally, to ensure the quality and safety of the cable pipes, it is crucial to choose reputable manufacturers and high-quality products. During the construction process, it is necessary to follow relevant construction standards and technical requirements to ensure the installation quality and effectiveness of the cable pipes.
In short, MPP cable protection pipe has a variety of specifications, and the selection of appropriate specifications and connection mode is very important for cable protection. In practical application, it is necessary to consider and choose comprehensively according to the specific situation, so as to ensure the safety, reliability, economy and practicality of cable pipeline.